Defog frosted headlights easy and cheap.

I made a video to show how to easily and cheaply repair frosted headlights and bring back that clear plastic headlight.

What you need:
-Rags.
-Motor oil (Clean/unused).
-Plastic headlights that are faded.

Continue reading “Defog frosted headlights easy and cheap.”

How I make my own hot air blocking panel for intake air filter.

I started using a piece of cardboard between my battery and the intake a few years ago, and it seemed to gave me about a 2 miles per gallon increase. (Though after building this, I received criticism that this will not help with gas mileage, but will help with performance!)

Now it was time for me to relocate my battery so now I have to make a Hot air block from scratch.
I made this one from metal, and I expect better performance than my cardboard version.

hot air block for intake air filter

This is the finished hot air block and my new battery box

Continue reading “How I make my own hot air blocking panel for intake air filter.”

How I make my own car battery box with tie down.

I was using the stock battery mount location, with a normal tie down, but it kept having issues and getting loose.
So then bought a replacement tie down, but that also came loose.
I wanted to relocate the battery to the trunk, but I have way too many wires added in over time (inverter, fuel pump, 2x amps, and more). So I decided to relocate to about the same area under the hood, but lower and out of the way.

DIY Battery relocate CRX

Continue reading “How I make my own car battery box with tie down.”

Info about JDM vs USDM y21 or s80 transmission

There are many differences between the JDM and USDM transmissions on Honda b-series engines. Here are some of the things I discovered while rebuilding several transmissions.

Shift fork pivot ball sizes
Shift fork pivot ball sizes
Transmission oil fill bung sizes
Transmission oil fill bung sizes

Continue reading “Info about JDM vs USDM y21 or s80 transmission”

How to swap transmission oil fill bung – JDM vs USDM

2 years ago I bought a s80 case (USDM) when I rebuilt my y21 JDM transmission, because of cracks in the y21 housing.
Then after 1 year of use, a metal plate on the freeway hit my transmission and caused a hole.
The aluminum was brittle and filled with stress cracks in the housing, so when I TIG welded the hole, it caused issues.

I decided to go to the junk yard and get a s80 case from an integra. I found a 1995 3 door RS 5spd and pulled the transmission. (read about it here)
I did not know it at the time, but after I got home, I found it impossible to find a large oil cap.
I tried Honda and Acura dealers, and even used JDM engine suppliers, but no one had any for sale.
The USDM 1994-1995 Honda Del Sol VTEC model is the only USDM car with that oil cap. The part is discontinued and not available.
I needed a way to cap my new rebuild, so I tried to change the breather vent tube (oil fill hole) from the USDM s80 case to the JDM s80 case.

JDM vs USDM S80 Y21 oil fill tube

Continue reading “How to swap transmission oil fill bung – JDM vs USDM”